Aerospace Engine Valves
Printed in 1 Week

At Omniflo, we design and manufacture high-performance, monolithic 3D-printed rocket engine valves. Delivered in 7 days, versus the 16-week industry average. We remove the leading hardware bottleneck to high orbital launch cadences.

1 Week

Turnaround Time

1 Piece

Monolithic Body

0 Leaks

No Internal Seals

Aligning CAD Assemblies
0%
The Core Problem

Aerospace is Bottlenecked by Legacy Manufacturing

To reach higher launch cadences, rocket manufacturers must iterate and scale engine assemblies fast. But engine valves are currently complicated multi-piece welded and brazed assemblies. Sourcing them takes 16 weeks on average. A single design revision can freeze testing programs for 4 months. We solve this.

Monolithic Architecture

Our proprietary single-piece monolithic designs optimize gas and liquid flow while eliminating assembly welds, fasteners, and potential leak points.

1-Week Turnaround

By verticalizing structural modeling, LPBF metal printing, vacuum heat treating, and automated CNC post-processing into a single continuous pipeline.

Parametric Cores

Foundational Topologies

We maintain a proprietary database of aerospace valve topologies. Don't start from scratch. Select a base architecture and we adapt the CAD for your specific mission profile.

Omni-CV-01READY

High-Flow Control Base

// AVAILABLE PARAMETERS
> MODIFY_CV_RATING
> SCALE_ORIFICE_DIAMETER
> ADJUST_SPRING_RATE
> SWAP_SEAL_MATERIAL
Omni-SV-04READY

Solenoid Actuated Base

// AVAILABLE PARAMETERS
> TWEAK_COIL_VOLTAGE
> MODIFY_RESPONSE_TIME
> CHANGE_HOUSING_ALLOY
> TOGGLE_LATCHING_MECH
Omni-PR-02READY

Proportional Relief Base

// AVAILABLE PARAMETERS
> SET_CRACKING_PRESSURE
> RESIZE_POPPET_GEO
> CONFIGURE_LEAK_RATE
> ADJUST_HYSTERESIS
Omni-CC-09READY

Cryogenic Check Base

// AVAILABLE PARAMETERS
> SPECIFY_CRYO_TEMP
> MINIMIZE_THERMAL_MASS
> OPTIMIZE_FOR_LOX
> ADJUST_FLAPPER_ANGLE
The Product Evolution

Zero Assembly. One Single Print.

We eliminate assembly failures and manufacturing lead times by consolidating complex hardware into optimized monolithic geometry.

Traditional Assembly

  • 15+ Separate ComponentsRequires fasteners, O-rings, flanges, and gaskets, creating multiple potential failure points.
  • 16-Week Production CycleSourcing components from multiple vendors, precision machining, brazing, welding, and manual assembly.
  • Suboptimal Machined Flow ChannelsLimited to straight lines and right angles due to drilling constraints, causing high pressure drops.
  • Excess Structural WeightThick walls and large mounting flanges required to prevent leaks at joins and weld interfaces.

Omniflo Monolithic Valve

  • 1 Monolithic PieceZero seals, zero welds, zero fasteners. The entire valve body is printed as one single continuous component.
  • 1-Week Delivery GuaranteeAutomated parametric geometry generation, immediate direct metal 3D printing, vacuum heat treatment, and CNC post-processing.
  • Topology Optimized Flow ChannelsOrganically curved channels tailored to match exact fluid dynamics, improving overall flow efficiency.
  • Zero LeaksOver 16 potential leak points avoided by consolidating components into a single seamless printed structure.
The Turnaround Engine

The 1-Week Production Loop

Our vertically integrated additive manufacturing flow eliminates the standard 16-week supply chain latency.

Parametric Engineering & Analysis

Day 1

Based on your propulsion system requirements and fluid medium specs, our engineers configure our proprietary monolithic valve topology. We run in-house FEA structural stress analysis and CFD fluid flow simulations to validate pressure drop and cycle life prior to production.

Parametric Engineering✓ Milestone

Direct Metal 3D Printing

Days 2-3

We print the optimized monolithic valve body using state-of-the-art Laser Powder Bed Fusion (LPBF) in high-strength Inconel. The single-piece print incorporates complex internal channels that are optimized for stress distribution.

LPBF Additive✓ Milestone

Vacuum Heat Treatment

Day 4

The printed valves undergo high-temperature vacuum furnace annealing and hot isostatic pressing (HIP) to relieve thermal stresses, eliminate micro-porosities, and match wrought material mechanical properties.

Microstructure Relief✓ Milestone

Subtractive CNC Finishing

Day 5

Critical mating surfaces, sensor ports, internal seat faces, and threaded bolt holes are precision machined using our automated 5-axis CNC setup to ensure aerospace-grade tolerances (0.5 microns tolerance).

High-Precision Machining✓ Milestone

Inspection & Fast Track Shipping

Days 6-7

After final dimensional inspection and quality verification, the monolithic valve is packed and shipped directly to your testing or launch facility, ready to integrate into your hot-fire test stand.

Flight Ready✓ Milestone
Parametric Engineering

Parametric Engineering & Analysis

Based on your propulsion system requirements and fluid medium specs, our engineers configure our proprietary monolithic valve topology. We run in-house FEA structural stress analysis and CFD fluid flow simulations to validate pressure drop and cycle life prior to production.

Timeline Phase: Day 1Verifiable Milestone ✓
Get In Touch

Request Valve Specifications & Pricing

Submit your mission operating parameters and envelope constraints. Our engineering team will review your requirements, configure the appropriate monolithic valve topology, and follow up with technical specs and pricing within 24 hours.

Hardware Specification & RFQ